Technical Specs
| Function |
Narrow Stile Latch Lock
|
| Cylinder Type |
Less Cylinder
|
| Handing |
LH or RHR |
| Door Thickness |
1-3/4" to 2" |
| Std. Latch Type |
Guarded Latch |
| Std. Latch Backset Dim |
1-1/8" |
| Lock Face Size |
6-7/8" x 1" |
| Bolt Projection |
1/2" |
| Std. Strike Number |
4902-01 |
| Std. Strike Type |
Mortise |
| Std. Strike Height |
2-5/8" |
| Std. Strike Width |
1-9/16" |
| Dust Box |
Plastic |
| Screws |
Machine |
| Product Type |
Mortise Lock |
Product Specs
| Manufacturer |
Adams Rite |
| SKU |
4510-36-201 |
| Installation |
Commercial |
| Origin |
USA |
| Unit of Measure |
Each |
| Base Material |
Aluminum |
| BAA Qualified |
Yes |
| Limited Warranty |
5 Years |
The Adams Rite 4510-35-201 Standard Duty Deadlatch, has a Flat Faceplate, a Guarded Latch, a 1 1/8" Backset, a 2 5/8" Mortise Strike, is Sold Less Cylinder, and is for Left-Handed or Right Hand Reverse applications.
4510 Standard Duty Deadlatch
4510 Standard Duty Deadlatches provide flexible traffic control during and after business hours.
The 4510 Series has includes a reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S Deadlock of same backset and faceplate shape.
- Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
- Cylinder Backset: 7/8”, 31/32”, 1-1/8” or 1-1/2” only
- Case: Measures 1” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
- Latchbolt: 1/2” x 1” x 1/2” throw. All metal with hardened steel internal pins. Handing is reversible without special tools.
- Auxiliary Bolt: All metal. Deadlocks latch bolt to prevent “loiding” or case-knife entry.
- Strikes: Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush. Available separately: radius strike for opposite stile in paired doors; longer strike (4901) to cover slot strike of MS lock; long lip strikes for centerhung doors.
- Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS for cylinder make, thumbturn and trim ring information.
- Options: Backset, faceplate shape, strike, handing, and finish must be specified when ordering.
