All Norton Products

Norton 7123SZ-689 SafeZone Electromechanical Closer/Holder with Motion Sensor, Push Side, Double Lever Arm, Aluminum

  • SKU: 7123SZLH24V689
Norton 7123SZ-689 SafeZone Electromechanical Closer/Holder
Norton 7123SZ-689 SafeZone Electromechanical Closer/Holder
All Norton Products

Norton 7123SZ-689 SafeZone Electromechanical Closer/Holder with Motion Sensor, Push Side, Double Lever Arm, Aluminum

  • SKU: 7123SZLH24V689
$2,472.00/ea
Available (2‑3 Weeks)
2-3 Weeks Lead Time
  • LH Left Hand
  • RH Right Hand
  • 24VDC
  • 120VAC
Handing: LH Left Hand
Voltage: 24VDC
Choose Your Product Options:
Your Height *
Select your height in feet and inches for our reference
Waist Size *
Choose the waist size corresponding to where on your waist the saree will rest. Some like it high, some like it low. (In between sizes go for the smaller size)
Custom Waist Size *
Please enter your waist size. Additional charges are due to the requirement of additional saree fabric.
Waist to Floor Length (inches) *
Select the length from your waist to floor - consider if you will wear heels.
Shoulder Drape Style *
Choose your preferred shoulder drape
Blouse Options *
Choose your option for a matching top
Blouse Style Options *
Please note: In some cases the blouse worn by the model may be for styling purposes only and actual blouse color will be in the last image. A back tie may be added for deep neck and open back designs.
3/4 Sleeves Blouse Options *
Adjustable Blouses $35-$50 *
Crossback ties enclosures make the sizing adjustable
Back Tie Blouses *
Cap Sleeve Blouses $30-$35 *
Half Sleeves Blouses *
Halter Blouse Options *
Sleeveless Blouse Options *
Sleeveless Blouse Options
Upload Custom Design *
No file chosen...
Choose File
Order Blouse By Standard Size or Custom Measurements *
New Standard Blouse Size Chart
Size Chart
Standard Blouse Sizes *
Choose your size based on the size chart. Note: bust size is not the same as bra size.
Blouse Chest Size *
Choose your bust size in inches (This is different from bra size. Measure around fullest part of your chest)
Underbust Measurement *
To measure your underbust, you can use a soft measuring tape to measure around your rib cage directly under your breasts
Blouse Length Measurement *
Measure from the top of the shoulder down to the bottom of the blouse on the side or back
Front Neck Depth *
For Boatneck & Closed Neck Blouses Choose 0, only. Measure diagonally from the edge of your shoulder to the deepest part of the desired neckline
Back Neck Depth *
For Boatneck & Closed Neck Blouses Choose 0, only. Measure diagonally from the edge of your shoulder to the deepest part of the desired back neckline
Shoulder Arm Hole Measurement (Inches) *
Measure around your shoulder for the arm hole. Please be sure to watch the video.
Blouse Length *
Choose your preference, longer blouse will add 2 inches
Bra Band / Cup Size *
Choose your Bra Size for sizing reference
Blouse Opening *
Choose your preference for the Blouse enclosure
Blouse Padding *
Add padding to the blouse for bra-less comfort

Technical Specs

Type Surface
Technology Special Application
Mounting Location Push Side
Mounting Style Top Jamb
Hold Open Yes
Hold Open Type Electric
Arm Type Double Lever Arm Regular
Hand RH or LH
Degree Swing 180 Deg. / 165 Deg.
Back Check Adjustable
Door Size 28"- 40"
Reveal Size 2-3/4" to 4" / 4" to 7"
Product Type Surface Closers

Product Specs

Manufacturer Norton
SKU 7123SZ 689
Installation Commercial
Origin USA
Unit of Measure Each
Base Material Varies
BAA Qualified Yes
Limited Warranty 2 Years
Fire Rated 3 Hours {A}
Finish 689/US28
Finish Description Aluminum Painted
Finish Family Matte Silver

 

The Norton 7123SZ-689 is an Electromechanical Closer/Holder with a Motion sensor, has a Double Lever Arm, is Handed, for Reveals 2-3/4"-4" (70-120mm) to 180 °, Reveals 4"-7" (102-179mm) to 165 °,  for use with 28" to 40" doors and comes in Aluminum 689 Finish. Norton 7123SZ-689 is available in both 120 VAC or 24 VDC voltage.

7100SZ Series Safe Zone

Designed with safety in mind, SafeZone® takes door closers to the next level.

SafeZone uses a multi-point, electromechanical closer and a programmable motion sensor. When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing. When movement is no longer detected, the adjustable setting times out and the door closes.
  • Electromechanical closer units to be a multi-point, closer/holder type with selective hold open positioning achieved by electronic solenoid locking of closer arm slide into the track assembly. Closer/holder units to have a maximum opening of 180° (hold open to 175°) and are fail safe to close the door in the event of electrical power interruption.
  • SafeZone Detection: Closer/holders units to have an integral sensor device monitoring a "zone of safety" at the door opening. SafeZone detection prevents the door from closing in the event of movement within the adjustable sensing field. Movement is detectable in both directions with selectable closer hold open time and sensor sensitivity. Mechanical closer to be hydraulic type with full rack and pinion construction enclosed in a cast aluminum alloy shell. Internal hydraulic fluid is to be non-gumming and non-freezing. Include two non-critical valves to independently regulate sweep and latching speeds and an adjustable backcheck cushioning valve. All valves are adjustable by hex key. Provide spring power adjustment permitting a 50% increase in closing power over the minimum closing force for any closer size. 
  • Mounting: Closer units can be surface mounted to the frame face for application on the pull (hinge side) side of door, or soffit mounted on the push side of the door frame with projection of no more than 2-5/8" (67mm) from the frame face. Frame face must be a minimum 2" and ceiling clearance a minimum of 4". Door must be hung on either butt hinges or 3/4" offset pivot hinges, minimum 1-3/4" to 2-1/4" thickness.
  • Installation: Provide optional handheld remote device for programming SafeZone sensor settings. Auxiliary door stops are recommended at closer/holder openings and required at doors opening beyond 110°. Interior installation only. 
  • Power: Closer units operate on (120VAC, 60Hz) or (24VDC) with an amperage draw not exceeding (.086 Amps for 24VAC/DC) (.051 Amps for 120VAC). Supplier to coordinate electrical requirements with electrical and alarm system engineers. Field wiring (and conduit) by others.

 

Related Hardware

Recently viewed

Protected by hCaptcha
Protected by hCaptcha