All PEMKO Products
- Description
- Specifications
- Certifications
- Document Center
- Handing Chart
Description
Pemko CFM83HD1HT Continuous Geared Hinge Full-Mortise Heavy Duty Hospital Tip Clear Anodized Finish - 83" Fire Rated - UL10C - Positive Pressure
The Pemko CFM83HD1-HT Continuous Geared Hinge Full-Mortise Heavy Duty Hospital Tip Clear Anodized Finish Fire Rated - UL10C - Positive Pressure, Pemko's CFM83HD-1-HT Hospital Tip heavy-duty anodized aluminum Full Mortise units are designed mainly for new door applications
Features:
- Fasteners are No. 12-24 x 7/16" FHUC, Type C, thread forming, no tapping required
- Applied to conceal both leaves
- With a continuous hinge, typical alignment problems (such as door sag and binding) are eliminated.
- The continuous hinge distributes load stress uniformly along the full length of the door and frame.
- The gear design of the continuous hinge ensures the symmetrical operation of each leaf.
- 1/2 lb. or less operating force is required to operate most doors, regardless of size.
- The low operating force feature makes continuous hinges ideal for doors used by the physically challenged.
- The continuous hinge acts as reinforcement for both the door and frame.
- A high degree of security can be achieved for exterior openings or restricted spaces by using a continuous hinge. With the geared construction and the full-length channel cap, the common gap between the door and frame is sealed, which provides security against prying.
- In addition, the closing of this gap protects against pinching fingers indoors in public areas, particularly those where children are present.
- Sight-proof design of the continuous hinge provides privacy for lavatories, executive offices, or file rooms.
- PemkoHinge has increased critical stress points of the leaf extrusions, which provides additional strength and rigidity to the completed product.
- PemkoHinge has a new bearing design that eliminates premature wear, guarantees proper alignment, and requires fewer bearings to carry more weight. This new bearing is produced for Pemko using a chemical composition and injection process that provides a stronger, more accurately formed bearing.
- PemkoHinge is designed with inter-meshing gear segments in the hinge which provide 50% more bearing surface. With a more bearing surface, less wear results.
- PemkoHinge also goes through the anodizing process after completing all machining. This means the machined aluminum surfaces that are in direct contact with the bearing have a smoother, harder surface, thereby reducing wear.
- PemkoHinge maintains uniform bearing spacing the full length of the hinge even when lengths exceed 10 ft.
- PemkoHinge uses #12-24 size fasteners instead of #10. (#12 Tek fasteners available upon request).
- PemkoHinge commercial models are ideal for use on lead-lined doors (i.e. hospital X-ray rooms), without requiring special screw locations.
Specifications
| Finish: | C - Clear Anodized |
| Length: | 83" |
| Width: | 25/32" (19.8 mm) |
| Height: | 2-9/16" (65.1 mm) |
| Manufacturer: | Pemko |
Certifications
| BHMA: | BHMA Certified |
| UL: | Fire Rated - UL10C - Positive Pressure |
| Other Certifications: | PemkoHinge Fire Rating - UL76Y2 |
Document Center
Handing Chart
